Skip Search Ratio Setting; Play Function; App & Ipod Mode - Kenwood DPX500BT Instruction Manual

Listen to the iPod

5-5. Skip search ratio setting

You can change the ratio of skip performed as
mentioned in <Skip Search> (page 17).
1
Select the iPod source.
Refer to <Source selection> (page 14).
2
Press and hold the [AUDIO] button.
Enter the Function setting mode.
3
Use the [Control knob] to select "SETTINGS"
"SKIP SEARCH".
For how to use the [Control knob], refer to <3-3.
How to select the item> (page 13).
4
Use the [Control knob] to select a ratio (0.5,
1, 5, 10).
The previous item appears.
Exit the Function setting mode
Press and hold the [6] button.
18
|
DPX500BT/ DPX300U

5-6. Play function

Repeat play
Press the [4] button.
Switches between Repeat ("FILE REPEAT") and off
("REPEAT OFF") when pressed.
Random play
Press the [3] button.
Randomly plays the music.
>
Pressing the button toggles the setting between
Random play on ("FOLDER RANDOM") and off
("RANDOM OFF").
Press this button again cancels the Random play.
All Random play
Press and hold the [3] button.
All songs in iPod are played at random.
Pressing the button toggles the setting between
All random play on ("ALL RANDOM") and off
("RANDOM OFF").
Press this button again cancels the All Random
play.
Notes
• The time required to turn on the all random function may
become longer depending on the number of songs in iPod.
• Turning on the all random function changes the iPod
browse item to "Songs". This browse item will not be
changed even if the all random function is turned off.
• If the browse item is changed to search for music while the
all random function is on, the all random function is turned
off and the songs in the browse item are played at random.
5-7. APP & iPod Mode
Allowing you to operate iPod with the control on
the iPod.
DPX500BT
Press the [5] button.
DPX300U
Press and hold the [iPod] button.
When the APP & iPod mode is selected, "MODE ON"
appears.
Canceling the APP & iPod mode
DPX500BT
Press the [5] button.
DPX300U
Press the [iPod] button.
Operation when "APP&iPod MODE" is "ON"
• When "APP&iPod MODE" is set to "ON", this unit can control
only the "Pause and play", "Selecting a song", and "Fast
Forward or Fast Backward of the Song" functions.
19
English |