Kenwood DPX500BT Instruction Manual page 25

13. General settings
13-1. Clock setting
1
Press and hold the [AUDIO] button.
Enter the Function setting mode.
2
Use the [Control knob] to select "SETTINGS"
"CLOCK".
For how to use the [Control knob], refer to <3-3.
How to select the item> (page 13).
3
Use the [Control knob] to select a Clock
setting item.
Display Description
"TIME SYNC" Synchronizes this unit's clock with the radio
data system station's time data.
"ON" / "OFF"
(Colored text: Factory setting)
4
Use the [Control knob] to select a setting.
The previous item appears.
Exit the Function setting mode.
Press and hold the [6] button.
48
|
DPX500BT/ DPX300U
13-2. Muting the audio upon
reception of a phone call
Function of DPX300U
The audio system automatically mutes when it
>
receives an incoming call.
When a call comes in
"CALL" appears.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
To use this function
• To use the TEL Mute feature, you need to hook up the MUTE
wire to your telephone using a commercial telephone
accessory. Refer to <Connecting Wires to Terminals> (page
12) in Quick start guide.
13-3. Demonstration mode setting
You can turn on/off the demonstration mode.
1
Press and hold the [AUDIO] button.
Enter the Function setting mode.
2
Use the [Control knob] to select "DEMO
MODE".
For how to use the [Control knob], refer to <3-3.
How to select the item> (page 13).
3
Use the [Control knob] to select a setting
("ON" or "OFF").
Exit the Function setting mode.
Press and hold the [6] button.
13-4. Initial settings
You can configure initial settings of this unit.
1
Select the Standby source.
Refer to <Source selection> (page 14).
2
Press and hold the [AUDIO] button.
Enter the Function setting mode.
3
Use the [Control knob] to select "INITIAL SET".
For how to use the [Control knob], refer to <3-3.
How to select the item> (page 13).
4
Use the [Control knob] to select an Initial
setting item.
Display Description
"PRESET TYPE" Sets the Tuner preset type.
"TYPE NORMAL": 1 station can be assigned to
1 preset button in each of 4 bands (FM1, FM2,
FM3, and AM), i.e., a total of 24 stations (6
stations x 4 bands) can be preset.
"TYPE MIX": A total of 6 stations can be
assigned to a total of 6 preset buttons
regardless of band (FM1, FM2, FM3, and
AM). You can recall a preset station without
switching between bands.
"KEY BEEP" Setting the operation check sound (beep
sound) ON/OFF.
"ON" / "OFF"
"PANDORA SRC" Sets whether to display Pandora during source
selection.
"ON" / "OFF"
"IHEART SRC" Sets whether to display iHeartRadio during
source selection.
"ON" / "OFF"
(Function of DPX500BT)
"AHA SRC" Sets whether to display aha during source
selection.
"ON" / "OFF"
(Function of DPX500BT)
"BUILT-IN AUX" Sets whether to display AUX during source
selection.
"ON" / "OFF"
"CD READ" Sets the method for reading CD.
When unable to play a special format CD, set
this setting to "2" to force playing. Note that
some music CDs may be unplayable even
when set to "2".
In addition, audio files cannot be played when
set to "2". Normally, keep this set to "1".
1: Automatically distinguishes between the
audio file disc and music CD when playing
a disc.
2: Forces playing as a music CD.
English |
49