TP-Link M7350 User Manual page 14

The screen Indication:
Item

Note:
When you leave alone the buttons on the device, the screen will light on for 15 seconds and
then turn off. Pressing the power button will light up or turn off the screen.
Power Button: When the Device is successfully installed, press this button until the screen

appears
this button until the screen appears "Power off".
Micro USB Port: It's for you to connect the Device with the power adapter (attached in the

package) via the USB cable.
RESET Button (hole): It's the button to restore the Device to its factory defaults. With the

Device powered on, use a pin to press and hold the RESET button (hole) for about 5
seconds, until the screen displays "Power Off"; then release the button and wait the Device
to reboot and restore its factory default settings.
M7350
Description
Signal strength
Network Type and Internet
Connection
Data Roaming
SMS
Wi-Fi connection
Battery
Download speed
Cumulative Traffic Usage
/ Total (Monthly) Allowance
that you have set
Table 1-1 The screen details
to turn on the Device, and if you want to turn it off, please press
-4-
LTE-Advanced Mobile Wi-Fi User Guide
Indication
Indicates the signal strength of current
network.
Indicates the current network option: 2G
/3G /4G, and the successful network
connection.
Indicates you are in roaming service.
Indicates that there is un-read message(s)
and the amount of un-read messages.
Displays the Wi-Fi status and the amount
of current wireless clients.
Displays the remaining battery power.
Indicates the download speed of current
data transmission.
Indicates the data used in total and the
Total (Monthly) Allowance that you have
set. The Cumulative Traffic Usage will be
cleared after resetting the Device.