Debug Log: To use the debug log function:
1)
Insert an SD card with at least 100M free space.
2)
Go to the "Advanced > Storage Sharing" page and configure the Wi-Fi access mode.
Note:
1)
Do not enable the debug log function unless required by your technical support.
2)
Do not remove the SD card or change its mode when using the debug log function.
Click Refresh to update the log list.
Click Clear to delete all the logs.
Click Save Logs to save the logs to your local computer.
4.4.7.7. About Device
You can view the related information about this device on this page.
M7350
LTE-Advanced Mobile Wi-Fi User Guide
Figure 4-31 System log
-41-