Advertisement
FD8362 GPIO Pinouts
Blue: Ground
Red: Digital Output
1
2
3
4
5
Shown above is the network camera's General Purpose IO terminal block. Connect the IR
illuminator's red and blue lines to pin7 and pin5 on the terminal block.
Top View
For Ethernet
For Power & IO Cables
Cable
6
7
8
Power and IO cables pass through a waterproof
connector. All cables are user-supplied.
Remove the plastic cap on the opening for IO cables
and replace it with the included waterproof connector.
1
2
3
4
5
6
7
8
Tips
Replace the side opening cover with the included
side outlet bushing if you want to route cables
from the side of camera. The 1/2" protection
conduits and tubing are separately purchased.
6
DC 12V-
DC 12V+
AC 24V_2
AC 24V_1
DI- (GND)
DI+
DO-
DO+ (12V)
Advertisement
