Advertisement
III
Wiring
There are 5 wires with the illuminators: 3 for power connections and another 2 as control
lines to the Digital outputs from a network camera. Refer to the diagram below for details.
Power cords
AC Power Connection
Power lines are connected to a power cord with a power plug. Use them to connect the
power cords you separately purchased.
Control Line Connection
The DI/DO terminal block is accessed by opening the camera dome cover.
Dome Cover
Connector Block
Dark Blue: AC input
Green: GND
Brown: AC input
Red
Light Blue
To Camera
GPIO Block
5
Terminal Block
Advertisement
