Advertisement
Install the IR illuminator behind your network camera, i.e., FD8362/FD8362E. Orient its
shooting angle after you slightly loosened the ball swivel screws. Secure the illuminators'
shooting angle by fastening socket screws on the ball swivels.
If you drilled a hole on the wall, you can pass power lines through the hollow of the
illuminator bracket and then through the hole.
Mounting hole
When planning the surveillance area, take into account the achievable distance. Optimal
results can be achieved by setting up at night and observing the results on a management
session screen. Adjust the illuminators' shooting angles so that the camera's field of view
is correctly lit..
View Plane
271.3mm
Camera
* The IR tube housings have been
removed from this drawing for
simplicity sake.
Near View Plane
60° projection angle
Max. 40m
Illuminator bracket
Mounting hole
Far View Plane
118.9°
4
39.6°
Advertisement
