Assigning Ip Address - Vivotek NR7401 Quick Installation Manual

5

Assigning IP Address

1. Set up NR7401 in LAN. When in LAN, the default IP address for NR7401 is
192.168.100.1. Directly enter the IP address in the addrees bar of the web browser. The
webpage of NR7401 will be displayed for you to configure the settings.
2. If you want to access NR7401 over the Internet, please assign a WAN IP address in the
configuration page. There are three ways to get WAN IP address: DHCP (Dynamic IP),
Static IP address, and PPPoE (DSL).
If your network environment is DHCP, you can use VIVOTEK Installation Wizard 2 (IW2)
to get an IP address easily.
(1) Install the "Installation Wizard 2" under the Software Utility directory from software
CD.
(2) The program will conduct analyses on your network environment. After your network
is analyzed, please click on the "Next" button to continue the program.
Installation
Wizard 2
(3) The program will search the VIVOTEK Network Devices in the same LAN.
(4) After searching, the main installer window will pop up. Click on the MAC that match-
es the one labeled on the bottom of your device to connect the Internet Explorer to
NR7401.
0002D107893F
3. Use the WAN IP address to access NR7401 from the Internet.
00-02-D1-07-89-3F
0002D107893F
EN - 7
192.168.5.131 NR7401