BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
N O T E :
sensitive!
6.5.1
Help or ?
Entering help or ? at the BNA bootloader>
prompt followed by <Enter> displays all available
BNA Bootloader commands.
In each sub-shell help or ? can also be used to view
the existing commands.
All command lists can vary between different users.
The lists don't show any commands which a user is
not allowed to execute.
6.5.2
np - Basic network parameters
The basic network parameters command np is used
to define the IP address, the network mask, and the
default gateway of the BNA device. This infor-
mation is normally provided by the local IS
department.
np is not a direct command; instead, it provides a
sub-shell with the following commands:
display
modify
32
All BNA Bootloader commands are case-
displays current basic network settings.
changes basic network settings. After
entering this command, each basic net-
work
parameter
individually. After having entered all
requested information, it will be asked
will
be
EN1B-0198GE51 R1004B
queried