Honeywell Q7055A Installation Instructions Manual page 17

device has to be prepared prior to mounting it to a
wall.
Figure 4-3
Figure 4-4
Figure 4-5
EN1B-0198GE51 R1004B
BUILDING NETWORK ADAPTER BNA-1C/2CS/2DN
Put the BNA-adapter with the
top side down on the desk
(Figure 4-3).
Remove the four feet (Figure
4-3) from the bottom of the
BNA
horizontally away from the
housing with a flat screw-
driver (Figure 4-4).
Push
(included) fully and hori-
zontally
(Figure 4-5).
by pushing
the four
into the
them
inserts
housing
17