Section A; Specifications; Section A Specifications - Toyostove Laser 300 A Installation And Operation Instructions Manual

SECTION A:

SPECIFICATIONS

Model:
Heater Efficiency:
Heat Rating:
Fuel Consumption:
Fuel System:
Fuel Type:
Dimensions (W ✕
Weight:
Vent Pipe Hole:
Maximum Length of Vent Pipe System:
Electrical Rating:
Typical Room Size (3):
(1) Heat and vaporized water are produced by the combustion process of this heater. This rating does not take
into account heat loss due to condensation of water vapor.
(2) External tank to be purchased from local suppliers.
(3) 0˚F Heat Load = 24 BTU/ft2/hr
20˚F Heat Load = 20 BTU/ft2/hr
Room size for which this heater is suitable will vary depending on outside temperature, house insulation,
window size, and other factors.
2
H ✕ D):
Laser 300
92.4% (1)
High - 15,000 BTU/h
Med - 10,100 BTU/h
Low - 5,310 BTU/h
High - 0.108 gal/h (0.409 L/h)
Med - 0.076 gal/h (0.288 L/h)
Low - 0.040 gal/h (0.151 L/h)
External tank (2)
1-K kerosene (ASTM D3699)
Low Sulfur No.1 Fuel (ASTM D396 S500)
Ultra Low Sulfur Diesel Fuel (ULSD) or
Ultra Low Sulfur Heating Oil (ULSHO) (ASTM D975 S15)
17-3/8" ✕ 21-3/4" ✕ 15-1/8" (440
31 lbs. (14 kg) Empty
2-3/4" – 3" (7.0 – 7.5 cm) diameter
10 ft. (3 m), 3 bends or less
120 Volts AC, 60 Hz
Preheat - 240W
Burning - 23W
600 square feet (0˚F)
720 square feet (20˚F)
✕ 555 ✕ 385 mm)