Section F; Routine Maintenance; Section F Routine Maintenance - Toyostove Laser 300 A Installation And Operation Instructions Manual

SECTION F:

ROUTINE MAINTENANCE

CAUTION: Be sure to turn off and unplug heater before performing any checks or cleaning.
CAUTION: Allow heater to cool completely before cleaning or maintenance.
FOR OPTIMUM HEATER PERFORMANCE, THE PARTS SHOWN BELOW SHOULD BE CLEANED REGULARLY:
Louver
1. Clean Louvers (ONCE A MONTH)
Dust and stains should be wiped off louvers with a damp cloth.
2. Clean Circulation Air Filter (ONCE A MONTH)
A mesh filter is located on heater cabinet rear side.
Once a week slide the filter up to remove and it should be
vacuumed clean.
3. Check for Fuel Leaks (REGULARLY)
Make it a habit to check for any sign of fuel leakage along the fuel line and at all
joints. Fuel leaks may lead to risk of fire.
4. Check Flue Pipe Area (ONCE A MONTH)
Check the flue pipe joint to make sure connection is firm. Use a vacuum cleaner to
remove any dust or pet hair.
16
Ciraulation air filter
Fuel strainer
(inside)
Check
Check