DFI-ITOX G5G100-L10C User Manual page 46

3
BIOS Setup
Video
This field selects the type of video adapter used for the primary
system monitor. Although secondary monitors are supported, you do
not have to select the type. The default setting is EGA/VGA.
EGA/VGA Enhanced Graphics Adapter/Video Graphics Array. For
CGA 40
CGA 80
Mono
Halt On
This field determines whether the system will stop if an error is
detected during power up. The default setting is All Errors.
No Errors The system boot will not stop for any errors detected.
All Errors The system boot will stop whenever the BIOS detects
All, But Keyboard The system boot will not stop for a keyboard
All, But Diskette
All, But Disk/Key
Base Memory
Displays the amount of base (or conventional) memory installed in
the system. The value of the base memory is typically 512K for
systems with 512K memory installed on the motherboard or 640K
for systems with 640K or more memor y installed on the
motherboard.
46
EGA, VGA, SVGA and PGA monitor adapters.
Color Graphics Adapter. Power up in 40-column
mode.
Color Graphics Adapter. Power up in 80-column
mode.
Monochrome adapter. Includes high resolution mono-
chrome adapters.
a non-fatal error.
error; it will stop for all other errors.
The system boot will not stop for a disk error;
it will stop for all other errors.
The system boot will not stop for a disk or
keyboard error; it will stop for all other errors.