DFI-ITOX G5G100-L10C User Manual page 19

Power-on Select
1
JP10 is used to select the method of powering on the system. If you
want the system to power-on whenever AC power comes in, set
JP10 pins 1 and 2 to On. If you want to use the power button, set
pins 2 and 3 to On.
Important:
If you want the system to automatically power-on when power
returns after an AC power failure, you must:
1. Set JP10 pins 1 and 2 to On.
2. The PWRON After PWR-Fail field must be set to "On".
(Integrated Peripherals submenu, Super I/O Device section
of the BIOS).
Hardware Installation
1 2 3
1-2 On:
Power-on via
JP10
power button
AC power
2
1 2 3
2-3 On:
Power-on via
(default)
19