Advertisement
„ Functions and connections
„
This unit consists of an active speaker (R channel) that has a built-in stereo power amplifier and
a passive speaker (L channel) that does not have an amplifier.
• The power must be off when you make connections.
Headphone output or line
output of your computer
Headphone output of
your portable audio
player
To AC outlet
Active speaker (R channel)
Equipped with a stereo power amplifier, and
plays the right channel of the input signal.
„ V OLUME knob
Switches on/off the unit and adjusts the
volume.
[INPUT] terminal (L/R)
Connect to the analog output terminal of
an audio player using the supplied RCA pin
cable.
[L-OUT] terminal
Connect to the [L-IN] terminal of the
passive speaker using the supplied speaker
cable. The left channel of the input signal
from the [INPUT] terminal is transmitted
to the passive speaker through the built-in
amplifier.
[DC IN] terminal
Connect the supplied AC adapter.
Audio cable
(supplied)
INPUT
R
L
AC adapter (supplied)
Active speaker
PM0.1
Personal Active Speaker System
VOLUME
OFF
MAX.
INPUT
R
L
L-OUT
N2215
DC IN
CONFORMS TO
ANSI/UL STD.
60065
CERTIFIED TO
12V 1.5A
CAN/CSA STD.
C22.2 NO. 60065
SERIAL No.
MADE IN CHINA
Passive speaker (L channel)
Not equipped with a stereo power amplifier,
and plays the left channel of the input signal
when connected to the active speaker using
the supplied speaker cable.
„ [ L-IN] terminal
Connect to the [L-OUT] terminal of the
active speaker (R channel) using the
supplied speaker cable.
* Auto standby function
The auto standby function is activated when the
input signal stops for about 15 minutes, and power
consumption is reduced to below 0.5 W. The power
indicator lights in red while the function is working.
The power indicator lights in white and playback starts
when the input signal is received again. This function
may not work properly depending on the noise level
of the input signal.
Passive speaker
Speaker cable (supplied)
3
Advertisement
