Table of Contents
Advertisement
Available languages
Available languages
07WTM002887 57004-24 rJ.qxd
2/13/07
11:51 AM
• Set the time you want to begin watering for cycle start time 1
using the
+
or
–
buttons, then press the
ENTER
button. For
additional cycle start times, simply press
NEXT
to advance to
the next cycle start time and repeat this procedure by using the
+
and
–
buttons to enter the time and then press ENTER.
Important: Additional start times will repeat the watering program.
Generally, only one cycle start time is required for each program (A, B, or C).
Note: You cannot set a cycle start time for each station. Stations can
be assigned to either Program A or B or C. Each program can have
up to four cycle start times. Stations assigned to a program will turn
on sequentially according to the cycle start times assigned.
2. Selecting the Watering Frequency in
Programs A, B, or C
This sprinkler timer will allow you to select watering frequency
based on "Day(s) of the Week", "Intervals" (1 to 32 days), or "Odd
or Even Days". All of these options are available to use in programs
A, B and C.
By turning the dial to
WATERING DAYS
(in program A, B or C) the
LCD displays the 3 watering options. [See Figure 6]
• Mo Tu We Th Fr Sa Su applies to Day(s) of Week
watering option
• Odd Even applies to the Odd or Even watering option
• Interval applies to the Interval watering option
"DAY(S) OF WEEK" WATERING OPTION
The Day(s) of Week option allows you to select specific days of the
week to water (e.g. Monday, Wednesday and Saturday).
To set Day(s) of Week Option:
• Turn the rotary dial to
WATERING DAYS
in A, B, or C.
• Press
NEXT
until the desired day of the week flashes. Press
ENTER
to select that day. Day(s) selected will have a water
drop icon
over the day of week. Continue until all the
desired days are selected. [See Figure 7]
6
Page 6
A
SET WATERING
DAYS-WEEKDAY
M
O
T
U
W
E
T
H
F
R
S
A
S
U
ODD EVEN INTERVAL
Figure 6: Selecting Watering Days
A
SET WATERING
DAYS-WEEKDAY
M
O
T
U
W
E
T
H
F
R
S
A
S
U
ODD EVEN INTERVAL
Figure 7: Selecting "Days of Week"
Important: ODD, EVEN, INTERVAL do not apply to Day(s) of Week
watering option
• To delete a day, previously selected, press the
NEXT
the day flashes and press the
CLEAR
button to deselect the day.
A
SET WATERING
DAYS-INTERVAL
M
T
W
T
F
S
S
O
U
E
H
R
A
U
Figure 8: Selecting "Interval Watering"
"INTERVAL" WATERING OPTION
Interval watering is used to water at an interval from 1 to 32 days.
An interval of 1 will water every day; an interval of 2 will water
every other day, etc.
To set the watering "Interval":
• Turn the rotary dial to
WATERING DAYS
• Press
NEXT
until "interval" flashes on the display. [See Figure 8]
• Select the "INTERVAL" by pressing the
desired interval number and press ENTER.
• To remove a previous set interval, continue to press the
button until "INTERVAL" flashes (in the lower right corner)
and press CLEAR. Enter a new interval or continue to press
the
NEXT
button to select a different watering option.
"ODD OR EVEN" WATERING OPTION
The sprinkler timer can be selected to only water on Odd days or
key until
Even days. The odd/even schedule is based on the date. You can also
choose to water on odd or even days with spaced intervals.
Example: If you select Odd days with an interval of 2. The program will
water every other odd day (or every 4 days)
A
SET WATERING
DAYS-ODDDAY
--
DAYS
ODD EVEN
INTERVAL
M
T
W
O
U
E
Figure 9: Selecting "Odd/Even Watering"
To set watering for ODD Days:
• Turn the rotary dial to
• Press
NEXT
until "ODD" flashes on the display. If you wish to
water every odd day, press
[See Figure 9]
in A, B, or C.
• If you wish to water on odd days but less frequently than
every other day, press
5 for watering.
+
or
–
buttons to the
• Press
ENTER
to save.
To set watering for Even Days proceed with the above steps but
NEXT
select "EVEN" on the display.
Note: The sprinkler timer will NOT water on the first day the program is
entered or modified if the start time(s) have already passed.
EVERY
2
DAYS
T
F
S
S
ODD EVEN
INTERVAL
H
R
A
U
WATERING DAYS
in A, B, or C.
ENTER
to confirm the programming.
+
or
–
to set the interval from 1 through
7
Hide quick links:
Advertisement
Table of Contents
