Normal Print Mode Activation (Incl. Form Feed) - Microplex SOLID 50 A3 - 3 Operator's Manual

_______________________________________________________________________________________________

5.5. Normal Print Mode Activation (incl. FORM FEED)

Note: After activating the normal print mode a FORM FEED is released
automatically and one sheet is put out. This is necessary because
after a test in the Hexdump-Mode it is possible that data can
remain in the input buffer unintentionally (cause: in the Hexdump-
Mode no control characters are evaluated and no FORM FEED is
effected).
_______________________________________________________________________________________________
MICROPLEX
The normal print mode suspends the Hexdump-Mode.
This function is activated, when a print job must be continued
without turning the printer off and on again. In addition to that
the function "Normal Print Mode Activation" is used to produce
a FORM FEED.
Panel display
[SOLID 50 A3 - 3 ]
[Menu Level 1 ]
[Status Sheet ]
  
[Normal Print /FF]
[Normal Print/FF ]
Operator's Manual SOLID 50 A3 - 3
Panel Functions
Notes
Turn the printer OFF LINE with this
key.
Menu Level 1 is selected.
Press the NEXT or PREVIOUS key until
[Normal Print/FF ] is displayed.
The normal print mode is activated.
The printer is turned ON LINE again.
77
Edition 2.1