Battery Replacement - Extech Instruments SDL900 User Manual

Ac/dc magnetic meter
Table of Contents

Advertisement

Battery Replacement 
 
When  the  low  battery  icon 
hours  of  accurate  readings  are  still  possible  in  this  condition;  however  batteries  should  be 
replaced as soon as possible: 
 Remove the two (2) Phillips screws from the rear of the meter (directly above the top of the 
tilt stand). 
 Remove and safely place the battery compartment and screws where they will not be 
damaged or lost. 
 Replace the six (6) 1.5V 'AA' batteries observing polarity. 
 Replace the battery compartment cover with the two (2) Phillips screws. 
Note: The meter can also be powered by a DC 9V Power Adapter. The meter will be permanently 
powered ON when the DC adapter is used as the power supply (the power button function is 
disabled). 
 
 
All EU users are legally bound by the battery ordinance to return all used batteries to
collection points in the community or wherever batteries / accumulators are sold!
Disposal in the household garbage is prohibited!
 
  appears  on  the  LCD,  the  batteries  must  be  replaced.  Several 
9
                                                      
EXTECH INSTRUMENTS 
SDL900‐en‐GB_V1.4   5/15
 

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SDL900 and is the answer not in the manual?

Table of Contents