Table of Contents
Advertisement
Auto: If you set Exposure mode as Auto, lens iris will be controlled automatically, the Exposure time and
Gain control will be not configurable since the sensor library will automatically adjust the value according
to the ambient light. Then you can set iris mode as "indoor" or "P-iris" to reach the best image quality.
■ Iris mode: Select Indoor or P-iris mode to adapt to the installation. The preset aperture setting will
apply. Normal operating of Indoor mode is 1000lux or less. Select "Indoor" when flicker is annoying in
doors.
True WDR (Wide Dynamic Range) :
The true WDR feature allows the camera to capture both the dark and bright parts of an image and
combine the differences to generate a highly realistic image representative of the original scene, enabling
it to provide video quality close to the capabilities of the human eye.
When enabled, you can select the strength of the true WDR function. The Low, Medium, High options
correspond to the level of contrast between the overly-lit area and the shaded areas. For example, the
High option applies to a high contrast scenario.
NOTE:
● When the True WDR feature is enabled, the Exposure mode and the BLC functions will not be
configurable. The Exposure mode will be configured into the Auto mode.
● When completed with the settings on this page, click Save to enable the settings.
If you want to configure another sensor setting for day/night/schedule mode, please click Profile to open
the Profile settings page as shown below.
Please follow the steps below to setup a profile:
1. Check Enable and apply this profile.
2. Select the applied mode: Day mode, Night mode, or Schedule mode. Please manually enter a range
of time through which you want the Schedule mode to apply.
3. Configure Exposure control and True WDR settings in the folowing columns. Please refer to the
previous page for detailed information.
4. Click Save to enable the setting and click Close to exit the page.
78
2011/03/13 17:08:56
Advertisement
Table of Contents
