Panasonic DMR-BCT855 Operating Instructions Manual page 22

Getting started
Settings
[BCT855] [BCT850] [BCT755] [BCT750]
Easy Setting
The tuner in this unit is compatible with digital
Cable broadcast services and digital terrestrial
broadcast services.
• In these operating instructions,
[DVB-C] : indicates features applicable to digital
cable broadcasts (DVB-C).
[DVB-T] : indicates features applicable to digital
terrestrial broadcasts (DVB-T).
• This unit can receive only one of the two
services at a time.
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3
Select language, then press [OK].
4
Select country, then press [OK].
5
Select "Digital Cable (DVB-C) Channels" or
"Digital Terrestrial (DVB-T) Channels", then
press [OK].
1 [DVB-C]
Select the channel number allocation,
then press [OK].
• For Germany and Austria:
Normally set to "Preset Channel
Number".
• For Switzerland:
Normally set to "Operator's Channel
Number ( LCN )".
• To change channel allocation, restart Auto Setup
in Basic Settings menu and change channel
number allocation selection. (
• If channel is not found, restart Auto Setup in Basic
Settings menu. (
22
SQT0807
86)
86)
2 [DVB-C]
Select "Start Auto Setup", then press
[OK].
• Frequency
Auto
The preset frequency will be
automatically used.
Manual
Enter the frequency specified by your
cable provider with number buttons.
• Network ID
Auto
The preset Network ID will be
automatically used.
Manual
Enter the Network ID specified by your
cable provider with number buttons.
• Frequency and Network ID settings may be
necessary depending on the cable provider. For
details, consult the cable provider.
6
Auto Setup will start automatically.
(This operation may take some time.)
[DVB-C]
When tuning is completed, press [OK].
7
Clock will be set automatically.
If the clock setting screen appears, set the
time manually (
8
Set Quick Start to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
9
Select the item to match the type of TV
connected. ( 93, TV Aspect)
When "Easy Setting has been completed."
appears, Easy Setting is complete.
To stop partway
Press [RETURN ].
To restart setup or change TV signal type
( 86, Auto Setup)
To confirm that channels have been tuned
correctly ( 29, Using Channel List)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
97, Clock).