Panasonic DMR-BCT855 Operating Instructions Manual page 23

[BST855] [BST850] [BST755] [BST750]
Easy Setting
1
Turn on the TV, then select the appropriate
AV input to suit the connections to this unit.
2
Press [Í] on the remote control or [Í/I] on
this unit.
• The Easy Setting will start at the initial
power on.
3
Select language, then press [OK].
4
Select country, then press [OK].
5
Select the search mode, then press [OK].
6
Select "DiSEqC (Dual Tuner)", "Single Cable
System" or "DiSEqC (Single Tuner)" then
press [OK].
When selecting "Single Cable System"
1 Make the settings of user band.
User Band Settings
Start Auto Setup
Please confirm user band settings before starting Auto Setup.
Tuner 1
User Band
User Band Frequency
User Band PIN
Tuner 2
User Band
User Band Frequency
User Band PIN
Select
OK
RETURN
• User Band
You can set C1 to C8. Set to a User Band
not used by any other device.
• When only one User Band of the
Router is assigned, set "Tuner 2" to
"OFF". Note that you will not be able to
record two programmes
simultaneously.
• User Band Frequency
Set the User Band Frequency with
number buttons.
• User Band PIN
If the single cable router requires a PIN
to access an user band, enter the PIN.
• For details, read the manual of the single
cable router, etc.
C1
1284 MHz (preset: 1284 MHz)
Off
C2
1400 MHz (preset: 1400 MHz)
Off
2 Select "Start Auto Setup", then press
[OK].
Auto Setup starts.
These operations (Searching Satellite and
Searching Channels) may take some time.
• When selecting "DiSEqC (Dual Tuner)" or
"DiSEqC (Single Tuner)"
Auto Setup
Satellite Checking LNB1
Progress 0%
This will take up to 40 minutes.
LNB in 1 Checking...
Satellite
Press RETURN to skip Satellite installation
Searching Satellite
RETURN
• When selecting "Single Cable System"
Auto Setup
Satellite Checking LNB1
Progress 0%
This will take up to 40 minutes.
Tuner 1 Checking...
Satellite
Press RETURN to skip Satellite installation
Searching Satellite
RETURN
After tuning has been completed, clock will
be set automatically.
If the clock setting screen appears, set the
time manually (
7
Set Quick Start to "On", "Off" or "Timer
Setting for Quick Start", then press [OK].
8
Select the item to match the type of TV
connected. ( 93, TV Aspect)
When "Easy Setting has been completed."
appears, Easy Setting is complete.
To stop partway
Press [RETURN ].
To restart setup ( 87, Auto Setup)
To confirm that channels have been tuned
correctly ( 29, Using Channel List)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Getting started
100%
LNB in 2 Checking...
100%
Tuner 2 Checking...
97, Clock).
SQT0807
23