Sharp LC-37AD1E Service Manual page 23

2. In-process adjustment screen layout
Page
1/15
KEY WRITE
DATA COPY
INDUSTRY INIT SH
INDUSTRY INIT IBO
INDUSTRY INIT ALL
CENTER Version
OSD Version
CVIC Version
TTXP Version
IBO Version
MONITOR Version
STANDBY TYPE
HOTEL MODE
6. Loading the backup data and setting HDCP when the PC I/F unit is replaced
Nearly all data including factory settings, user settings, and channel setting is stored in the PC I/F unit.
The product comes with EEPROM (IC1506) on the Main Unit in case the PC I/F unit is replaced; original data
backed up on the EEPROM can be loaded to the new PC I/F unit.
∫ How to load the backup data
Select EEPROM RECOVER in the OSD menu (page 15) and turn the "VOL(+)/(-)" keys ON; then press "OK"
key.
∫ How to set HDCP
After completion of adjustments, select KEY WRITE "ON" in the OSD menu (page 1) for manual adjustment
and turn the "VOL(+)/(-)" keys ON; then press "OK" key.
∫ How to read the factory settings (backup data)
Select EEPROM RECOVER (page 15), set it from "OFF" to "ON" with the "VOL(+)/(-)" keys, and then press
the "OK" key.
∫ Adjustments required after reading the factory settings
1) Page 2
Ë +Badj3.3V Adjustment of reference voltage
Ë +Badj1.8V Adjustment of important component operating voltage (It is adjusted automatically by pressing
the "OK" key after performing 3.3V adjustment.)
2) Page 7 to Page 10
Ë PAL WB adjustment white balance adjustment (TV, VCR, etc.)
Ë N358 WB adjustment White balance adjustment (TV, VCR, etc.)
Ë COMP 15K WB adjustment White balance adjustment (Component 480i)
Ë COMP HDTV WB adjustment White balance adjustment (Component 1080i)
Source of input Colour system
INPUT2 NO SIG
OFF
OFF
OFF
OFF
OFF
0.86 (E 2003/08/19 B )
1.00 (J 2003/06/20 A )
W2003/06/26 13:25
V2002/04/19 11:26
TTX PRG
2070D
7A.7A7A
0
OFF
23
HDCP Main unit AV unit
HDCP: OFF EUROPE EUROPE M: LC-37AD1E
X2003/06/26 13:29
S2003/06/26 13:20
078
LC-37AD1E
Model name