Sharp LC-37AD1E Service Manual page 20

LC-37AD1E
13. Remove the eight lock screws from the Monitor PWB, and detach the main PWB.
14. Remove the six lock screws from the power PWB, and detach the power PWB.
15. Remove the four lock screws from the audio PWB, and detach the audio PWB.
16. Remove the three lock screws from the holder, and detach the holder.
17. Detach the inverter-1 PWB.
18. Remove the three lock screws from the inverter-2 PWB, and detach the inverter-2 PWB.
19. Detach the inverter-3 PWB.
20. Remove the three lock screws from the inverter-4 PWB, and detach the inverter-4 PWB.
21. Remove the two lock screws from the thermistor PWB, and detach the thermistor PWB.
22. Remove the two lock screws from the 1-Bit amplifier unit, and detach the 1-Bit amplifier unit.
23. Remove the three lock screws from the chassis, and detach the chassis.
16
Holder
13
22
15
1-Bit Amplifier Unit
Monitor PWB
17 19
Audio PWB
Inverter-1 PWB
Inverter-3 PWB
Inverter-4 PWB
Inverter-2 PWB
Thermistor PWB
20
18
23
Chassis
21
Power PWB
14
23
20