Sharp LC-37AD1E Service Manual page 16

LC-37AD1E
9. Remove the system/control terminal retaining:
9-1. Remove the four hex head screws securing the terminals of the system cable.
9-2. Remove the nine rear chassis retaining screws.
10. Remove the PC I/F and Audio I/F units:
10-1. Remove the six PC I/F unit retaining screws and remove the unit.
10-2. Remove the one PC I/F shield (Bottom) retaining screws and remove the Shield.
10-3. Remove the two Audio I/F unit retaining screws and remove the Audio I/F unit.
11. Remove the rear panel.
11-1. Remove the two hex head screws securing the terminals of RS-232C.
11-2. Remove the five rear panel retaining screws.
11-3. Remove the two power unit reaining screws and remove the rear panel.
12. Remove the three power unit retaining screws and remove the power unit.
10-1
PC I/F Shield (Bottom)
AUDIO I/F Unit
PC I/F Unit
10-2
Power Unit
10-3
9-1
9-2 9-2
9-2 9-2
12
Rear Panel
16
11-3
11-2
11-1