Static Pool Setting - D-Link DAP-2230 User Manual

Section 3 - Configuration
A static pool allows specific IP addresses to be reserved to wireless stations.
Function Dynamic Host Configuration Protocol (DHCP) assigns IP addresses to wireless
Enable/ devices on the network. This protocol simplifies network management and
allows new wireless devices to receive IP addresses automatically without the
Disable:
need to manually assign IP addresses. Select Enable to allow the DAP-2230
to function as a DHCP server.
Assigned IP: Use the Static Pool Settings to reserve IP addresses to specific devices. The IP
addresses assigned in the Static Pool list must NOT be in the same IP range
as the Dynamic Pool. After you have assigned a static IP address to a device
via its MAC address, click Save; the device will appear in the Assigned Static
Pool at the bottom of the screen. You can edit or delete the device in this list.
Assigned Enter the MAC address of the device requesting association here.
MAC Address:
Subnet Mask: Define the submask of the IP address specified in the IP Assigned From field.
Gateway: Specify the Gateway address for the wireless network.
WINS: Specify the Windows Internet Naming Service (WINS) server address for
the wireless network. WINS is a system that determines the IP address of
a network computer with a dynamically assigned IP address, if applicable.
DNS: Enter the Domain Name System (DNS) server address for the wireless
network. The DNS server translates domain names such as www.dlink.com
into IP addresses.
Domain
Specify the domain name for the network.
Name:
D-Link DAP-2230 User Manual

Static Pool Setting

60