Multi-Ssid - D-Link DAP-2230 User Manual

Section 3 - Configuration
The device supports up to four multiple Service Set Identifiers. In the Basic > Wireless section, you can set the Primary SSID.
The SSID's factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to
establish a new wireless network.
Enable
Check to enable support for multiple SSIDs.

Multi-SSID:

Band:
This read-only value is the current band setting.
Index:
You can select up to three multi-SSIDs. With the Primary SSID, you have a
total of four multi-SSIDs.
SSID
Service Set Identifier (SSID) is the name designated for a specific wireless
local area network (WLAN). The SSID's factory default setting is
SSID can be easily changed to connect to an existing wireless network or
to establish a new wireless network.
SSID Enable or Disable SSID visibility. Enabling this feature broadcasts the SSID
across the network, thus making it visible to all network users.
Visibility:
Security: The Multi-SSID security can be Open System, WPA-Personal, WPA-
Enterprise, or 802.1x. For a detailed description of the Open System
parameters, please go to page 26. For a detailed description of the WPA-
Personal parameters, please go to page 27. For a detailed description
of the WPA-Enterprise parameters, please go to page 28. For a detailed
description of the 802.1x parameters, please go to page 29.
Priority: Check the Enable Priority box at the top of this window to enable. Select
the priority from the drop-down menu.
WMM (Wi-Fi Select Enable or Disable.
Multimedia):
D-Link DAP-2230 User Manual
Multi-SSID
dlink. The
34