Static Pool Setting - D-Link DAP-1353 User Manual

Section 3 - Configuration
Function Enable/
assigns IP addresses to wireless devices on
Disable:
management and allows new wireless devices
to receive IP addresses automatically without
the need to manually assign IP addresses.
Select Enable to allow the DAP-1353 to
function as a DHCP server.
Assigned IP:
IP address to a device every time you start up.
The IP addresses assigned in the Static Pool
Dynamic Pool. After you have assigned a static
IP address to a device via its MAC address, click
Apply
edit or delete the device in this list.
Enter the MAC address of the device requesting association here.
Assigned MAC
Address:
Subnet Mask:
D-Link DAP-1353 User Manual

Static Pool Setting

41