Specifications; Duty Cycle - Eastwood 4099 Assembly & Operating Instructions

Versa-cut 60 plasma cutter

Table of Contents

Eastwood-designed Versa-Cut 60 Plasma Cutter

The

as thick as 7/8". Compared to mechanical cutting, our Versa-Cut 60 Plasma Cutter works signiﬁ cantly faster, and makes curved and intricate cuts more easily and precisely.

A built in pilot arc system allows for instant arc striking and ease of use when cutting rusty material and expanded metal.

The internal moisture separator helps to ensure clean dry air gets to the torch to give you consistent results.

The Eastwood Company (hereinafter "Eastwood") warrants to the end user (purchaser) of all new welding and cutting equipment (collectively called the "products") that it will be free of

defects in workmanship and material. This warranty is void if the equipment has been subjected to improper installation, improper care or abnormal operations.

All warranty periods begin on the date of purchase from Eastwood. Warranty Periods are listed below, along with the products covered during those warranty periods:

If Eastwood conﬁ rms the existence of a defect covered under this warranty plan, Eastwood will determine whether repair or replacement is the most suitable option

to rectify the defect. At Eastwood's request, the purchaser must return, to Eastwood, any products claimed defective under Eastwood's warranty.

EASTWOOD WILL NOT ACCEPT RESPONSIBILITY OR LIABILITY FOR REPAIRS UNLESS MADE BY EASTWOOD. EASTWOOD'S LIABILITY UNDER THIS WARRANTY SHALL NOT EXCEED THE

COST OF CORRECTING THE DEFECT OF THE EASTWOOD PRODUCT. EASTWOOD WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES (SUCH AS LOSS OF BUSINESS, ETC.)

CAUSED BY THE DEFECT OR THE TIME INVOLVED TO CORRECT THE DEFECT. THIS WRITTEN WARRANTY IS THE ONLY EXPRESS WARRANTY PROVIDED BY EASTWOOD WITH RESPECT

ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY FOR THE EQUIPMENT INVOLVED. THIS WARRANTY GIVES THE PURCHASER SPECIFIC LEGAL RIGHTS.

SPECIFICATIONS

Amperage

Output Voltage

Output Range

20-60 Amps

104 V

DUTY CYCLE

The rated Duty Cycle refers to the amount of cutting that can be done within an amount of time. The Eastwood Versa-Cut 60 Plasma Cutter has a duty cycle of 60% at 60 Amps.

It is easiest to look at your cutting time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If cutting at 60 Amps with a 60% Duty Cycle, within a

10 Minute block of time you can cut for 6 Minutes with 4 Minutes of cooling for the cutter. To increase the duty cycle you can turn down the Amperage Output control.

is your smartest choice for making clean, fast cuts through steel, stainless or aluminum as thin as 24-gauge, or

STATEMENT OF LIMITED WARRANTY

3 Year Warranty on Material, Workmanship, and Defects:

Items not covered under this warranty: Electrodes, nozzles, diffuser, and external nozzle.

All other components are covered by the warranty and will be repaired or replaced at the discretion of Eastwood.

CONDITIONS OF WARRANTY TO OBTAIN WARRANTY COVERAGE:

Purchaser must ﬁ rst contact Eastwood at 1-800-345-1178 for an RMA# before Eastwood will accept any welder returns.

Final determination of warranty on welding and cutting equipment will be made by Eastwood.

The purchaser is responsible for shipment to and from Eastwood.

TO ITS PRODUCTS. WARRANTIES IMPLIED BY LAW SUCH AS THE WARRANTY OF MERCHANTABILITY

THE PURCHASER MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

Weight