Starting System; Checking; Main Switch - Kubota G2160 Workshop Manual

G2160, WSM

[2] STARTING SYSTEM

CHECKING

(1) Main Switch

Connector Voltage
1. Open the bonnet.
2. Disconnect the 4P connector from the main switch.
3. Measure the voltage with a voltmeter between the connector
terminal and chassis.
4. If the voltage differs from battery voltage, the wiring harness is
faulty.
Voltage (Connector
Factory spec.
terminal-Chassis)
8-S12
ELECTRICAL SYSTEM
Approx. battery voltage
W1011831
KiSC issued 11, 2006 A