Kubota G2160 Workshop Manual page 250

G2160, WSM
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-9.)
Starter
• M terminal nut
• C terminal nut
• Magnetic switch mounting nut
• Through bolt
Alternator
• Pulley nut
Item N·m
9.8 to 13.7
7.9 to 11.8
5.9 to 10.8
4.42 to 7.35
93.1 to 127.4
8-S10
ELECTRICAL SYSTEM
kgf·m ft-lbs
1.0 to 1.4 7.2 to 10.1
0.8 to 1.2 5.8 to 8.7
0.6 to 1.1 4.4 to 7.9
0.45 to 0.75 3.26 to 5.42
9.5 to 13.0 68.7 to 94.0
W1012736
KiSC issued 11, 2006 A