Installation; Mounting The Rx3001 To A Wall - Marantz RC3001 User Manual

INSTALLATION

MOUNTING THE RX3001 TO A WALL

MOUNTING LOCATION PRECAUTIONS
• Before mounting, check the material and structure of the mounting location. If the location does not
have the proper material or structure, the RX3001 can fall and cause an injury.
• Use commercial items that best match the wall structure and material for the screws and other
fi xtures.
• Do not mount near a kitchen counter, humidifi er, or other location in which it can be exposed to
smoke or steam. Doing so could cause a fi re or electrical shock.
• Do not mount in locations with high humidity or large amounts of dust. Doing so could cause a fi re
or electrical shock.
• Do not mount to locations subject to high temperatures, high humidity, or exposed to water. Doing
so could cause a fi re or electrical shock.
• Do not mount to locations subject to large amounts of vibration, large jolts, or large forces. These
could cause an injury if the RX3001 falls and breaks.
MOUNTING PROCEDURE PRECAUTIONS
• Do not modify parts or use the RX3001 in ways other than its intended use. Doing so could cause
the RX3001 to fall and result in an injury.
• Be sure to fully check that there are no electrical wires or pipes inside the wall before mounting.
• If any of the screws are loose, the RX3001 can fall and cause an injury. Do not mount the RX3001
with the screws still loose.
• Check that the two screws mounted to the wall are fully inserted into the key holes of the RX3001.
Otherwise, the RX3001 can fall and cause an injury.
• Do not mount the RX3001 so that it sticks out from the wall edge. It could get hit by people s bodies
or objects and cause an injury.
• Marantz will not be liable for any accidents or injuries that occur due to improper mounting or
handling.
• When mounting, be careful not to get your fi ngers pinched or injure your hands.
MOUNTING PROCEDURE
The RX3001 can be mounted to a wall or wooden racks using the two key holes in the bottom case.
The RX3001 can be oriented horizontally or vertically. Mount in the best way for your installation
conditions.
Notes:
• The reception sensitivity varies depending on the antenna direction. Find the direction providing the best
reception by adjusting the antenna direction before mounting the RX3001.
• No screws are provided for mounting to a wall.
• Before mounting to a wall, be sure to fully read the precautions.
1.
Obtain two screws suitable for the wall strength and material. The screw size is shown in the
fi gure below.
MIN 6.0 mm (3/16 ins.) ~
MAX 8.0 mm (3/8 ins.)
3.0 ~ 4.0 mm (1/8 ~ 3/16 ins.)
MIN 3.0 mm (1/8 ins.)
7