Ipod ® Playback; Before Playing A Usb Or An Ipod; Playing An Ipod; Disconnecting The Ipod - Marantz M-CR603 User Manual

ENGLISH
Symbols used to indicate buttons in this guide
Button located on both the main unit and the remote control
Button only on the main unit
Button only on the remote control
o/p u/i 8 、 9
<ENTER>
ON/STANDBY
8
[6]
u
o
i
[SEARCH]
[RANDOM]
18
iPod ® playback
With this unit, you can listen to music on an iPod. It is also possible to
BUTTON
operate the iPod from the main unit or remote control.
<BUTTON>
For the supported iPod models, see "Connecting an iPod" (vpage 8).
[BUTTON]
n iPod ® (vpage 40)

Before playing a USB or an iPod

13 2
1 Press ON/STANDBY
Connect USB memory device or iPod connection
2
cable.
When the USB memory device or iPod is connected to the USB
port on this unit, the input source automatically switches to
"iPod/USB" and fi le playback begins.
NOTE
This function is activated around 1 or 2 minutes after the power is
turned on.

Playing an iPod

1 Press [MODE]
ON/STANDBY
The mode switches each time the button is pressed.
• There are two modes for displaying the contents recorded on the
iPod.
13
Remote mode Display iPod information on the display of this unit.
9
Direct mode Display iPod information on the iPod screen.
[7]
• "Direct iPod" is displayed on the display of this unit.
2
[Selectable mode]
Display location
[MODE]
Audio fi le
Playable
[ENTER/MEMO]
fi les
Video fi le
p
Remote control
Active
and main unit
buttons
[HOME]
iPod ®
The default display mode setting is "Direct mode".
ui
2 Use
or
MEMO]
[DISPLAY]
played.
[REPEAT]
1/3
3 Press
Playback starts.
.
to select the display mode.
Remote mode Direct mode
Main unit display iPod display
to select the item, then press [ENTER/
to select the music fi le to be
<ENTER>
.
NOTE
• iPod nano 1G and iPod video do not have Direct mode support.
• Marantz will accept no responsibility whatsoever for any loss of iPod
data.
• Depending on the type of iPod and the software version, some
functions may not operate.
n Remote control and iPod button relations
Remote control
iPod buttons Operation on this unit
buttons
13 13
Play the track / Pause the track.
Play the track from the beginning/Play the
8 9 8 9
, ,
next track.
6 7 8 9
Fast-reverse the track/Fast-forward the
, ,
track.
Press and hold Press and hold
u i
Click Wheel Select an item.
,
ENTER/MEMO
Select Enter the selection or plays the track.
p
or
Switch between the Direct mode and the
MODE –
Remote mode.
REPEAT – Switch the repeat function
RANDOM – Switch the shuffl e function
Display the menu or return to the previous
o
MENU
menu.
2 – Stop the track.
HOME
– Return to top menu (Remote mode only)
n To switch the display
[DISPLAY]
During playback, press .
The display switches each time the button is pressed.
Artist name
Album name

Disconnecting the iPod

1 Press to set the standby mode.
ON/STANDBY
Disconnect the iPod cable from the USB port.
2