Capacities And Specifications - Ford Focus 2004 Owner's Manual

Capacities and specifications

IDENTIFICATION NUMBERS
Vehicle identification plate
The vehicle identification plate is
located in the engine compartment.
Vehicle identification number
The vehicle identification number is
additionally stamped onto the
plastic tag on the left-hand side of
the instrument panel. A symbol on
the tag identifies the air bag
system.
Engine number
Depending on the engine type, the
engine number is located (seen in
the direction of travel):
• Zetec-SE 16V engine – front
right, under the engine/
transmission flange
158
• Zetec-E/Duratec-8V/Duratec-ST
engines – at the exhaust side of the
engine block, adjacent to the
transmission housing flange
• Endura−TDDi/DuraTorq-TDCi
Turbo diesel engines – on the left
above the injection pump
FUEL
Use only high quality fuel without
any supplemental additives or other
engine treatments.
Vehicles with a petrol engine
Use unleaded petrol according to
specification EN 228 or equivalent
of minimum 95 octane (1.6 l
Duratec−8V minimum 91 octane).
Leaded fuel or fuel/additives
containing other metallic
compounds (e.g.
manganese-based) will damage the
emission control system.
Vehicles with a diesel engine
Use diesel fuel according to
specification EN 590 or equivalent.
Do not mix it with any oil, petrol or
other liquids. Diesel fuels which
contain a mix of up to 5 % RME
(bio diesel) are acceptable.
Prolonged use of supplemental
additives to prevent fuel waxing is
not recommended. Do not add
kerosene, paraffin or petrol to
diesel fuels.