D-Link DSL-2740U User Manual page 49

Section 3 – Web Configuration
wireless MAC addresses are in the access control list will be able to connect to your
Access Point. When Deny Listed is selected, these wireless clients on the list will
not be able to connect the Access Point.
There are 3 methods to realize wireless connection through WPS.
- PBC
Click the Start PBC button in this page. And then click WPS button on the client to
be connected within 2 minutes. The connection will be established.
- Based on the PIN of 2740U.
1) Do not select Disable WPS.
2) Click Start PIN button beside Pin Configuration.
3) Input the Device PIN (a random code displayed in this page) in the WPS
application interface of the client to be connected. Take this device for example,
the Device PIN is 71221045. And then click PIN on the client.
4) After setting, click Apply Changes.
Note:
If you want to change the PIN, click Regenerate PIN
button in this page.
- Based on the PIN of the client to be connected.
1) Do not select Disable WPS.
2) Find the PIN of the client to be connected. Input this PIN in the Client PIN
Number in this page. And then click Start PIN button below.
D-Link DSL-2740U User Manual
47