D-Link DSL-2740U User Manual page 45

Section 3 – Web Configuration
WPA Authentication
Mode
After setting, click Apply Changes to save the settings.
Set the Encryption to be WEP, then click Set WEP Key, and the following page
appears.
Note:
If the encryption is set to be WEP, the WPS function will be disabled.
The following describes the parameters of this page:
Field
Choose the WEP key length. You can Choose 64-bit or
Key Length
128-bit.
 If you choose 64-bit, you can choose ASCII (5 characters)
Key or Hex (10 characters).
 If you choose 128-bit, you can choose ASCII (13
Format
characters) or Hex (26 characters).
Default Tx Choose the index of WEP Key. You can choose Key 1, Key
Key 2, Key 3, or Key 4.
The Encryption keys are used to encrypt the data. Both the
modem and wireless stations must use the same encryption
key for data transmission.
 If you choose 64-bit and ASCII (5 characters), enter any
Encryption
Key 1 to 4 5 ASCII characters.
 If you choose 64-bit and Hex (10 characters), enter any
10 hexadecimal characters.
 If you choose 128-bit and ASCII (13 characters), enter
D-Link DSL-2740U User Manual
 Select Personal (Pre-Shared Key), enter the
pre-shared key in the Pre-Shared Key field.
 Select Enterprise (RADIUS), enter the port, IP
address, and password of the Radius server. You
need to enter the username and password
provided by the Radius server when the wireless
client connects the modem.
Description
43