Table of Contents
Advertisement
2
3
4
1. Operator's manual - Included with unit. Read
before operation and keep for future reference to
learn proper, safe operating techniques.
2. Throttle trigger - Device activated by the operator's
finger, for controlling the engine speed.
3. Rear handle - Handle located furthest from the drill
bit.
4. Silencer cover
5. Drill bit - Not included with unit.
6. Chuck
7. Front handle - Handle located on the front gear
case.
8. Shift lever
9. Fuel tank - Contains fuel and fuel filter.
10. Fuel tank cap - For closing the fuel tank.
DESCRIPTION
16
17
5
1
15
7
6
11. Air cleaner cover - Covers air filter.
12. Starter handle - Pull handle to start the engine.
13. Throttle trigger lockout - Device that prevents the
accidental operation of the throttle trigger until
manually released.
14. Ignition switch - Device for allowing the engine to
be started and stopped.
15. Spark plug
16. Safety decal - Part number X505-002310
17. Safety decal - Part number X505-002430
7
OPERATOR'S MANUAL
ENGINE DRILL
EDR-2400
WARNING
DANGER
READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR
SAFE OPERATION.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY.
14
13
12
11
10
9
8
Advertisement
Table of Contents
