Table of Contents
Advertisement
•
When starting to drill, run the engine at full throttle.
BEFORE DRILLING, BE SURE TO READ AND
UNDERSTAND THE ENTIRE OPERATOR'S
MANUAL TO AVOID THE CHANCE OF SERIOUS
INJURY.
•
Do not force the drills and only move as quickly as
the drills will allow.
•
Stop the engine and disconnect from ignition cable
before: - cleaning or when clearing a blockage;
checking, maintenance or working on the machine.
•
Handle fuel with care; it is highly flammable. Never
add fuel to a machine with a running or hot engine.
•
Do not attempt to repair the machine unless you
are qualified to do so.
OPERATING TECHNIQUES
WARNING
•
Do not operate the machine with a damaged or
excessively worn drill bit.
•
Always ensure all handles and guards are fitted
when using the machine. Never attempt to use an
incomplete machine or one fitted with an
unauthorized modification.
•
When transporting or storing the machine always
remove the drill bit.
•
To reduce fire hazard keep engine and silencer
free of debris, leaves or excessive grease.
•
Handle drill with care, contacting with drills may
cause injury.
6
Advertisement
Table of Contents
