1. Manuals
  2. Brands
  3. Echo Manuals
  4. Drill
  5. EDR-2400 Type 1
  6. Operator's manual

Echo EDR-2400 Operator's Manual

Engine drill
Hide thumbs Also See for EDR-2400:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Data
OPERATOR'S MANUAL
ENGINE DRILL
EDR-2400
WARNING
DANGER
READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR
SAFE OPERATION.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY.

Advertisement

Table of Contents
loading

Related Manuals for Echo EDR-2400

Summary of Contents for Echo EDR-2400

  • Page 1 OPERATOR’S MANUAL ENGINE DRILL EDR-2400 WARNING DANGER READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR SAFE OPERATION. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY.

  • Page 2: Table Of Contents

    INTRODUCTION ECHO Engine Drill EDR-2400 is a lightweight, high performance, two-stroke engined unit designed for WARNING drilling. IMPROPER USE OR CARE OF THIS UNIT, OR Do not use this unit for any purpose other than FAILURE TO WEAR PROPER PROTECTION CAN aforementioned.

  • Page 3: Decals And Symbols

    Make sure the decal is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. Part number X505-002310 Part number X505-002430...

  • Page 4: Safety

    Wear proper clothing to protect legs and other • Wear hearing protection. exposed parts of your body. ECHO recommends that hearing protection be worn at all times. • Wear non-skid sole shoes. Do not wear open-toed shoes or operate unit while bare footed.
  • Page 5 PHYSICAL CONDITION Repetitive Stress Injuries Your judgement and dexterity may be impaired if you It is believed that over-using the muscles and tendons are ill or have taken alcohol or other substances known of the fingers, hands, arms and shoulders may cause to affect the way you would normally function.

  • Page 6: Operating Techniques

    OPERATING TECHNIQUES • When starting to drill, run the engine at full throttle. • Do not operate the machine with a damaged or excessively worn drill bit. WARNING • Always ensure all handles and guards are fitted when using the machine. Never attempt to use an BEFORE DRILLING, BE SURE TO READ AND incomplete machine or one fitted with an UNDERSTAND THE ENTIRE OPERATOR’S...

  • Page 7: Description

    DESCRIPTION OPERATOR’S MANUAL ENGINE DRILL EDR-2400 WARNING DANGER READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR SAFE OPERATION. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY. 1. Operator’s manual - Included with unit. Read 11. Air cleaner cover - Covers air filter.

  • Page 8: Assembling

    Recommended mixture ratio; 50 : 1 (2 %) for ISO-L- EGD Standard (ISO/CD 13738), JASO FC, FD grade and ECHO Premium 50 : 1 oil. - Do not mix directly in engine fuel tank. - Avoid spilling petrol or oil. Spilled fuel should always be wiped up.

  • Page 9: Starting Cold Engine

    HANDLING FUEL DANGER AFTER REFUELLING, TIGHTEN FUEL CAP FIRMLY AND CHECK FOR LEAKAGE. IN CASE OF FUEL LEAKAGE, REPAIR BEFORE STARTING OPERATION SINCE THERE IS A DANGER OF FIRE. • Never smoke or allow flame or sparks near fuel. Fuel tank •...

  • Page 10: Stopping Engine

    STOPPING ENGINE • Set throttle trigger in idle position. • Place ignition switch in STOP position. Ignition switch NOTE STOP When engine does not stop, shift choke lever to close position. Check and repair ignition switch before starting the engine again. Throttle trigger Throttle trigger lockout REVERSE ROTATION...

  • Page 11: Maintenance And Care

    MAINTENANCE AND CARE AREA MAINTENANCE PAGE BEFORE USE MONTHLY YEARLY Air Filter Clean/Replace • Fuel Filter Inspect/Clean/Replace • Spark Plug Inspect/Clean/Adjust/Replace • Carburettor Adjust • Cooling System Inspect/Clean • Silencer Inspect/Tighten/Clean • Starter Rope Inspect/Replace • Drills Inspect/Clean/Lubricate • Fuel Leaks Inspect •...

  • Page 12: Trouble Shooting

    No fuel at • Fuel line clogged • Clean cranks carburettor carburettor • Carburettor • Ask your ECHO dealer • Carburettor • Ask your ECHO dealer Fuel at cylinder No fuel at cylinder • Fuel mixture is too rich • Open choke Silencer wet with •...

  • Page 13: Maintenance

    MAINTENANCE • If you have any questions or problems, please contact your ECHO dealer. AIR FILTER (Before Each Use) Remove air cleaner cover and pull out air filter. Lightly brush off dust or wash it in water and detergent. Dry completely before putting it back in place.
  • Page 14 REPLACEMENT OF CHUCK Replacement of chuck should be done in the following manner: Fit 19 mm spanner onto driving axle and keep it fitted. Remove bolt with hexagonal hole fixed in the driving axle. Insert accessory hexagonal bar (Part number Spanner (19 mm) 895412-20960) into chuck and fix.

  • Page 15: Storage

    • For future reference, you should keep this operator’s manual. • If this operator’s manual has become illegible through impairment or is lost, please purchase a new one from your ECHO dealer. OPERATOR’S MANUAL ENGINE DRILL • When renting or lending this machine to a person EDR-2400 who will operate it, always include this operator’s...

  • Page 16: Specifications

    10 % of ethyl alcohol. Two stroke, air-cooled engine oil. 50 : 1 for ISO-L- EGD Standard (ISO/CD 13738), JASO FC, FD grade and ECHO Premium 50 : 1 oil. Ratio 50 : 1 (2 %) Fuel consumption at maximum engine power L / h 0.67...
  • Page 17 MEMORANDUM...
  • Page 18 MEMORANDUM...
  • Page 19 MEMORANDUM...
  • Page 20 7-2 SUEHIROCHO 1-CHOME, OHME, TOKYO 198-8760, JAPAN PHONE: 81-428-32-6118. FAX: 81-428-32-6145. Printed in Japan X750-016 94 0 1006A 0099 ES X750 409-420 0 © 2010...

Table of Contents