Table of Contents
Advertisement
Quick Links
READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR
SAFE OPERATION.
FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY.
ECHO, INCORPORATED
400 Oakwood Road, Lake Zurich, Illinois 60047-1564
Phone : 847-540-8400
OPERATOR MANUAL
ENGINE DRILL
WARNING
EDR-260
X750-025 62 1
X750409-4601
Printed in Japan 1305sf1507 ES
1505sf 1456 ES
Advertisement
Table of Contents
Related Manuals for Echo EDR-260
Summary of Contents for Echo EDR-260
- Page 1 OPERATOR MANUAL ENGINE DRILL EDR-260 WARNING READ INSTRUCTIONS CAREFULLY AND FOLLOW RULES FOR SAFE OPERATION. FAILURE TO DO SO COULD RESULT IN SERIOUS INJURY. ECHO, INCORPORATED 400 Oakwood Road, Lake Zurich, Illinois 60047-1564 Phone : 847-540-8400 X750-025 62 1 X750409-4601...
-
Page 2: Table Of Contents
WARNING Some dust created by power sanding, sawing, grinding, drilling, and oth- er construction activities contains chemicals known to the State of Cal- ifornia to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: •Lead from lead-based paints, •Crystalline silica from bricks and cement and other masonry products, and •Arsenic and chromium from chemically treated lumber. -
Page 3: Introduction
INTRODUCTION ECHO Engine Drill EDR-260 is a lightweight, high WARNING performance, two-stroke engined unit designed for drilling. IMPROPER USE OR CARE OF THIS UNIT, OR FAILURE TO WEAR PROPER PROTECTION This Manual provides the information necessary for CAN RESULT IN SERIOUS INJURY. -
Page 4: Safety
• Wear hearing protection. from the fuel tank cap or the fuel system before ECHO recommends that hearing protection be starting the engine. worn at all times. • Operate this gasoline powered engine •... - Page 5 Wear non-slip, heavy-duty work gloves to WARNING improve your grip on the engine drill handles. The gloves also help reduce the transmission PRECAUTION AGAINST VIBRATION of machine vibrations to your hands. AND COLD IT IS BELIEVED THAT A CONDITION CALLED PROTECTING OTHERS RAYNAUD’S PHENOMENON, WHICH Spectators, children, fellow workers and animals...
- Page 6 Repetitive Stress Injuries It is believed that over-using the muscles and tendons of the fi ngers, hands, arms and shoulders may cause soreness, swelling, numbness, weakness and extreme pain in those areas. Certain repetitive hand activities may put you at a high risk for developing a Repetitive Stress Injury (RSI).
-
Page 7: Operating Techniques
OPERATING TECHNIQUES • When starting to drill, run the engine at full • Do not attempt to repair the machine unless throttle. you are qualifi ed to do so. • Do not operate the machine with a damaged or WARNING excessively worn drill bit. -
Page 8: Description
Part Number X505-002310 Part Number X505-002570 * If a decal cannot be read, a new one can be ordered from your ECHO dealer. 1. Operator’s manual - Included with unit. Read 9. Fuel tank - Contains fuel and fuel fi lter. -
Page 9: Assembling
ASSEMBLING FRONT HANDLE • Insert the front handle to the machine, and turn clockwise. (TIGHTEN THE SCREW FIRMLY) - To operate front handle with right hand, remove right plug then reverse sides when installing handle and plug. Washer Front handle DRILL BIT •... - Page 10 ISO-L- METRIC EGD (ISO/CD 13738) and J.A.S.O. FC/FD certifi ed Gasoline Gasoline oil, such as ECHO premium Power Blend X™, will Gallons US. fl . oz. void the two-stroke engine warranty. IMPORTANT 12.8...
- Page 11 HANDLING FUEL MIXING INSTRUCTIONS - DANGER 1. Fill an approved fuel container with half of the required amount of gasoline. FUEL IS VERY FLAMMABLE. USE EXTREME CARE WHEN MIXING, STORING OR 2. Add the proper amount of two-stroke oil to gaso- HANDLING OR SERIOUS PERSONAL INJURY line.
-
Page 12: Starting Cold Engine
STARTING COLD ENGINE WARNING WHEN ENGINE IS STARTED, CONFIRM IF THERE IS NOT ANY ABNORMAL VIBRATION OR SOUND. IF THERE IS ABNORMAL VIBRATION OR SOUND, ASK YOUR DEALER TO REPAIR. • Stand the engine upright on a level surface. • Place ignition switch in ON (START/RUN) position. -
Page 13: Maintenance And Care
REVERSE ROTATION • This model is equipped with reverse rotation Counter mechanism. clockwise • When drilling, set shift lever down to clockwise (CCW) (CW) rotation position. • If bit is locked due to deep penetration during drilling operation, set shift lever up to counterclockwise (CCW) rotation position and operate reversed for easy pulling-out. -
Page 14: Emission Data
SKILL LEVELS Level 1 = Easy to do. Common tools may be required. Level 2 = Moderate diffi culty. Some specialized tools may be required. DAILT OR EVERY 3 MONTHS YERLY REQ'D CONPONENT/ MAINTENANCE SKILL BEFORE REFUEL OR 90 SYSTEM PROCEDURE LEVEL HOURS... -
Page 15: Trouble Shooting
WARNING • ALL ENGINE DRILL SERVICE OPERATIONS, OTHER THAN ITEMS LISTED IN THE OPERATOR’S MANUAL, SHOULD BE PERFORMED BY AN AUTHORIZED ECHO DEALER. • FUEL VAPORS ARE EXTREMELY FLAMMABLE AND MAY CAUSE FIRE AND/OR EXPLOSION. NEVER TEST FOR IGNITION SPARK BY GROUNDING SPARK PLUG NEAR CYLINDER PLUG... -
Page 16: Maintenance
MAINTENANCE AIR FILTER • Clean before use. - Remove air cleaner cover and pull out air fi lter. - Lightly brush off dust or wash it in water and detergent. - Dry completely before putting it back in place. Air fi lter Air cleaner cover FUEL FILTER ... -
Page 17: Adjusting Carburetor
(96.0 kPa). To maintain proper engine operation and emission compliance above 1100 feet ASL the carburetor may need to be adjusted by an NOTE authorized ECHO service dealer. When there is some trouble with the carburetor, contact your dealer. IMPORTANT... - Page 18 CLEANING CYLINDER FINS (Check Cylinder fi ns Periodically) NOTE Clogged fi ns will cause poor engine cooling. 1. Carefully remove housing and clean dirt and dust from fi ns. 2. Reinstall housing. CLEANING SILENCER AND EXHAUST PORT (Check Periodically) 1. Carefully remove housing halves. 2.
-
Page 19: Storage
6. Tighten muffl er mounting bolts (or nuts) to 80- 95 in lbf (90-110 kgf cm). 7. Start engine, and warm to operating temperature. 8. Stop engine, and re-tighten mounting bolts (or nuts) to specifi cations. 9. Install engine cover and attach spark plug lead. STORAGE 6. -
Page 20: Specifications
Fuel mixture ratio 50:1 ratio with ECHO Power Blend X™ , ISO-L-EGD (ISO/CD 13738) and JASO M345-FC/FD two-stroke, air-cooled engine oil. gasoline Use 89 octane unleaded. Do not use fuel containing methyl alcohol, more than 10% ethyl alcohol or 15% MTBE. -
Page 21: Warranty Statements
ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty, provides to the original purchaser that this ECHO product is free from defects in material and workmanship. Under normal use and maintenance from date of purchase, ECHO agrees to repair or replace at ECHO’s discretion, any defective product free of charge at any authorized ECHO servicing dealer within listed below application time periods, limitations and exclusions. - Page 22 . Gasohol which contains a is also approved. The prescribed mixing ratio of gasoline to oil is listed on the ECHO oil label and covered in your operator’s manual. engine speeds as listed in your operator’s manual. of unauthorized attachments.
-
Page 23: Product Registration
Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It’s FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Inc. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifi... - Page 24 E52412001001 - E52412999999...