Table of Contents
Advertisement
4
Supported Softwares
4.2 Hardware Monitor
The system board comes with the Hardware Monitor utility
contained in the provided CD. It is capable of monitoring the
system's hardware conditions such as the temperature of the CPU
and system, voltage, and speed of the CPU and system fans. It also
allows you to manually set a range to the items being monitored. If
the values are over or under the set range, a warning message will
pop-up. The utility can also be configured so that a beeping alarm
will sound whenever an error occurs. We recommend that you use
the "Default Setting" which is the ideal setting that would keep the
system in good working condition.
To install the utility, insert the CD into a CD-ROM drive. The autorun
screen (Main Board Utility CD) will appear. Click the "Hardware
Monitor" button to install the utility. Refer to its "readme" file for
instructions on using the utility.
4.3 SiS AGP Driver
The SiS AGP driver includes the SIS VxD driver and SiS Minipor t
driver.
To install the driver, insert the CD into a CD-ROM drive. The
autorun screen (Main Board Utility CD) will appear. Click the "SIS
AGP Driver" button. For installation instructions or information, please
refer to the "readme" file in the CD.
4.4 SiS IDE Driver for Windows XP/2000
To install the driver, insert the CD into a CD-ROM drive. The
autorun screen (Main Board Utility CD) will appear. Click the "SIS
IDE Driver for Windows XP/2000" button. For installation
instructions or information, please refer to the "readme" file in the
CD.
78
Note:
Use this utility only in Windows
W indows
®
ME, Windo ws
®
Windows
XP operating system.
®
98, Windows
®
2000, W indows NT
®
98 SE,
®
4.0 or
Advertisement
Table of Contents
