Compaq Presario V6000 Maintenance And Service Manual page 129

Wireless antenna transceivers and cables
20. If it is necessary to replace the wireless transceivers and
cables, remove the Phillips PM2.0×4.0 screw 1 that secures
each transceiver to the display enclosure.
21. Remove the wireless antenna cables from the clips 2 built
into the display enclosure.
22. Detach the wireless antenna transceivers 3 from the
display enclosure.
23. Remove the wireless antenna cables 4.
Removing the Wireless Antenna Transceivers and Cables
Maintenance and Service Guide
Display Assembly Subcomponents
Spare Part Number Information
Removal and Replacement Procedures
431398-001
5–35