GEA FK40/390 K Maintenance Manual page 36

10 I Disassembly of the compressor
12
Removal of the roller bearings
Position in Parts list position: 2150
parts list
Tools: Pulling apparatus
Working course
2150, 730 - With the pulling apparatus pull out the roller bearing from the front bearing flange
INFO
If a pulling apparatus is not available, the front bearing flange may be heated for approx. 15 minutes in a pre-heated
(220°C) baking oven. Afterwards the roller bearing can be pressed out by hand.
CAUTION
- Press out the roller bearing from the compressor body
2150
- Take out the tolerance ring, if there is any
312
INFO
36
Use oil, if necessary!
Risk of burns!
Parts are hot! Use protective gloves!
Use oil, if necessary!