GEA FK40/390 K Maintenance Manual page 31

10 I Disassembly of the compressor
7
Disassembly of the compressor rods from the crankshaft
Position in Parts list position: 2040
parts list
Tools: Spanner SW 10
Working course
INFO
2100 - Unscrew the hexagon head screws from the connecting rod cap
2100 - Mark the connecting rod cap and remove it
2040 - Push the piston and connecting rod upwards until the shop
300, 290 - Remove the piston rings
- The same procedure should be applied for the remaining connecting rods
1
3
In order to prevent any mix-up during reassembly, mark the connecting rods and caps
belonging together clearly and in a wipe-resistant fashion!
2
31