GEA FK40/390 K Maintenance Manual page 28

10 I Disassembly of the compressor
4
Removal of the shaft seal
Position in Parts list position: 2010
parts list
Tools: Allen key 6 mm
Working course
INFO
- Place the oil collection container under the shaft seal area
2110 - Remove the leak oil collection device from the bearing flange (until type code 013)
750 - Unscrew the cylinder screws
CAUTION
2010 - Remove the shaft seal cover, the guide ring, the O-ring and the spring
28
For a detailed description for the old version (until type code 013) see also the section on
the removal of the shaft seal on page 16!
Danger of injury!
The shaft seal cover is under spring tension! It may jump out by itself.
Leak oil collection device