Advertisement
Qty
1
1
1
1
2
1
3. CONNECTING YOUR SMARTWATCH™ UNIT
Install the SWE Series on a flat surface. If required, attach the rubber mount for installation. If a 19-inch rack is used, it is
recommend to install the system on a shelf and use 2.5~3U (1U=1.75 inch or 4.45cm) space for proper ventilation.
Note
Install the system in a location with good ventilation to prevent overheating.
SWE4 Series
No.
Name
1
VIDEO-IN (BNC)
2
LOOP-OUT
3
MON-OUT
4
SPOT-OUT
5
S-VIDEO
6
Select NTSC / PAL
7
AUDIO IN
8
AUDIO OUT
ALARM/ SENSOR /RS-485
9
10
SERIAL Port
11
LAN Port
12
Power Input
13
Power Switch
SWE4 Series
Accessories
User Manual
IR Remote Controller
RemoteAgent CD
Power Cable
Power Battery (AAA Size)
Rubber Mount Set
Connect camera. (Supports NTSC/PAL)
Camera images of each channel will be outputted as is. Also, used when the
corresponding image is required for other product.
Connect to the main monitor for camera image for
surveillance/management/playback.
Use to output the entire surveillance screen one by one, in an interval.
Connect to S-Video input terminal to output image of the main monitor.
Select the signal system. (NTSC / PAL)
Connect Audio Input Device. (with Amp.)
Connect Audio Output Device. (with Amp.)
Terminal to connect external input sensor of 1~4 channel. (Supports N/O or N/C)
Connect RS-485 signal output or relay for P/T/Z camera control.
RS-232 port
10/100 Ethernet connection terminals for remote connection.
Power cable connection terminal for connecting to main power.
Switch to change input power. (115/230V)
SWE8 and SWE16 Series
Qty
Accessories
1
User Manual
1
IR Remote Controller
1
RemoteAgent CD
1
Power Cable
2
Power Battery (AAA Size)
1
Rubber Mount Set
1
Rack Mounts and Screws
Description
3 3 3 3
Advertisement
