Advertisement
12
12
12
12
Main
Classification
usage.
Schedule: Set the recording
schedule for the associated
camera.
Motion Area: Set the area and
sensitivity of the motion
detection.
Title: Input or modify the
channel name of the
connected cameras.
Colour: Set the brightness,
contrast, color and tint of the
connected cameras.
Audio & P/T/Z: Set the camera
audio and P/T/Z environment.
Alarm Input: Alarm-activated
recording.
Alarm Output: Set alarm
Alarm
actions regarding recording
and relay output.
Pre Alarm: The alarm is
activated and the images will
be recorded before the point of
alarm.
Sub Classification
Setting Category
720x576
640x288
352x288
Record
Mode
Start
End
Sensitivity
Centre
Full/User Area
Title
Brightness
Contrast
Colour
Tint
Audio
Aud-CH
P/T/Z Address
Camera
Start
End
Type
Relay
Alarm Mode
Dwell
Pre Alarm
Record Duration
Explanation
Set the speed rate (frame per second) to
record the image inputted through
connected camera.
Set the speed rate (frame per second) to
record the image inputted through
connected camera.
Set the speed rate (frame per second) to
record the image inputted through
connected camera.
Controls whether recording of the channel
will be on or off.
Setting the recording schedule after
selecting the weekly recording mode.
Set the recording start time for the cameras.
Set the recording end time for the cameras.
Set the motion sensitivity value.
Center area of camera image will trigger
recording.
Full area or user-selected area of the
camera image will trigger recording.
Input the camera title of selected camera.
Adjust the brightness (shades) of the
channel.
Adjust the contrast, which is the ratio of
brightness to darkness of the image.
Adjust the color density.
Set the color hue of connected cameras.
Select whether to use audio recording.
Select the audio channel to use among the
4 audio input channels.
Set the P/T/Z dome address of the
connected camera.
Select which camera the alarm recording
will trigger.
Select the sensor start time to set the
sensor-operating schedule.
Select the sensor end time to set the
sensor-operating schedule.
Select the sensor type.
Select the relay number to operate.
Select either Set or Duration depending on
the desired alarm action.
Set the period for which the alarmed
camera will be recorded and the relay
output turned on.
Decide whether to use the Pre Alarm
function.
Set the recording time for the image with
Pre Alarm activating.
Advertisement
