Advertisement
Main
Classification
System Information
Tools
System Upgrade
Event Viewer (only for the SWE4 Series)
Data Backup (only for the SWE4 Series)
Factory Default: Return to the default factory setting.
Log Off
Quit
Close Menu
6. 6. 6. 6. REMOTE AGENT SOFTWAR
REMOTE AGENT SOFTWARE E E E
REMOTE AGENT SOFTWAR
REMOTE AGENT SOFTWAR
Install the RemoteAgent Software on the PC where you want to view the DVR images. You can connect to the DVR via
LAN or DHCP (only for the SWE4 Series).
To make the connection to a DVR, first you have to register the DVR. Click the [CONNECT] button or right click and
chose Open Site/File (CTRL+O). The Site/File Open dialog box will appear. To add and register a new site, select
[ENABLE] and then click the [Add] button. You will be asked to enter the following information: connection type, site name,
server IP, user ID, password, channel, description and hot key. After you entered all this information, click the [OK] button
and the site (DVR) will be registered with the Remote Agent.
To connect to a registered DVR (site), click the [CONNECT] button on the upper right side of the Screen. All the
registered DVRs (sites) will appear in the Connect Panel on the Screen. Choose the one you want to connect to and drag
it to one of the channel screens. You can also right click on a channel screen and choose Open Site / File (CTRL+O). The
Site/File Open dialog box will appear. Choose the site you want to connect to and click [OK].
For more information see the RemoteAgent User Manual.
Sub Classification
2
Setting Category
3
4
6
1
7
Explanation
Signal System, Software Version, Hardware
Version, HDD Usage, IP Address, MAC
Address, Daylight Saving, Network
Connection
5
8
13
13
13
13
Advertisement
