Montigo 30FID Traditional Installation & Maintenance Manual page 59

4). Remove 3 screws that hold the Firebox Baffle in location.
Figure 50 Sec.10
5). The Firebox Baffle can be lowered at the front and then pulled
forward away from 2 studs that secure the rear.
Figure 51 Sec.10
6). Remove the 4 screws that secure the bypass plate to the
bottom of the Heat Exchanger.
CAUTION: Screws may be tight. Use DW40 to help reduce the
risk of screws stripping or breaking heads.
Figure 52 Sec.10
XG00524- 150909
Maintenance
7). Once the Restrictor has been removed, it is important that you
return the screws to their locations again.
Figure 53 Sec.10
8). Re-install the Firebox Baffle, left and right Upper Firebox Panel
Retainers, Firebox Panels and Burner assembly and door.
I-Series Indoor Gas Fireplace
Page 59