Audio Out - Marantz DV9600 User Manual

DVD Setup Menu

Audio Out

• Default setting: 2 Channel
If you connected this player to your amplifier using
the 5.1 channel analog outputs (front, surround,
center and subwoofer outs), set this to 5.1
Channel; if you connected only the stereo
outputs, set to 2 Channel.
Set this to 5.1 Channel when outputting multi-
channel audio from the i.LINK port; when output-
ting 2-channel audio, set to 2 Channel.
About source audio output
When the source output mode has been switched between the 5.1 Channel and 2 Channel mode settings using
the Audio Out setting in the Setup screen Audio Setup 1 menu, audio output for each source will be as shown in
the following table.
AUDIO OUTPUT
CONTENTS MODE
5.1 CH
Dolby
Digital
2 CH
Dolby
5.1 CH
Digital
Karaoke 2 CH
5.1 CH/
LPCM
2 CH
5.1 CH
DTS
2 CH
5.1 CH/
MPEG
2 CH
5.1 CH
DVD
-Audio
2 CH
5.1 CH/
CD
2 CH
5.1 CH
Super Audio CD
2 CH
5.1 CH/
Video CD
2 CH
*1
: Discs that prohibit downmixing will be output front L channel and front R channel.
*2
: Discs that prohibit downmixing also mute the digital output.
*3
: The left/right audio tracks are output when playing a CD layer.
AUDIO OUT (2 CH)
Center
L, R (Front L,R)
Center
Front Lch, Rch
2 ch DOWNMIX Lch, Rch
Lch, Rch
Lch, Rch
Front Lch, Rch Center
2 ch DOWNMIX Lch, Rch
2 ch DOWNMIX Lch, Rch
Center
Front Lch, Rch
*1
2 ch DOWNMIX Lch, Rch
Lch, Rch
Front Lch, Rch Center
2 ch DOWNMIX Lch, Rch
Lch, Rch
Note
• Even if you set Audio Out to 5.1 Channel,
you'll only get sound from all speakers when
playing a multi-channel DVD-Audio disc, multi-
channel Super Audio CD disc, Dolby Digital or
DTS encoded DVD disc.
• If you set to 2 Channel, Dolby Digital and DTS
are mixed down to two channels so you still
hear all the audio recorded on the disc.
• Some DVD-Audio discs don't allow down-
mixing of audio. These discs always output
multi-channel audio regardless of the setting
made here.
• Sound recorded on MPEG is outputted on 2
channel even if Audio Out is set to 5.1 CH.
• This setting cannot be chosen when HDMI is
connected while either Auto or Multi PCM
selected for the HDMI audio setting. (page 54)
• Audio is not output from the audio output jacks
when i.LINK is connected. (page 55)
AUDIO OUT (5.1 CH)
Surround L,R Sub Woofer
LFE
Surround LS, RS
2 ch DOWNMIX
MUTE
MUTE
MUTE
Surround LS, RS LFE
2 ch DOWNMIX
MUTE
2 ch DOWNMIX
MUTE
Surround LS, RS LFE
MUTE
MUTE
Surround LS, RS LFE
MUTE
MUTE
DIGITAL OUTPUT (S/PDIF)
PCM Bit Stream
Dolby Digital
Lch, Rch
Dolby Digital
Lch, Rch
Lch, Rch
DTS
Lch, Rch
MPEG
Lch, Rch
*2
2 ch DOWNMIX Lch, Rch
Lch, Rch
*3
MUTE
Lch, Rch
6
39