Video Adjust - Marantz DV9600 User Manual

5 Playing Discs

Video Adjust

You can set the picture settings you desire and
store them in the player's memory.
Selecting a preset
1 Press the VIDEO ADJ. button on the re-
mote control.
2 Select Memory Select Memory Select Memory Select Memory Select Memory Select.
3 Select a preset.
• Standard – optimized settings for a standard
television set
• Memo 1, 2, 3 – User presets (see below for
more on these)
You can highlight a preset while a disc is playing
(before you press ENTER to select it) to see the
effect on the picture immediately.
Note
Depending on the disc and your TV/monitor, the
effect of these settings may not be clear.
30
Press ENTER
Creating your own setting
1 Press the VIDEO ADJ. button on the re-
mote control.
2 Select Setup Setup Setup Setup Setup.
3 Use the cursor buttons (2/3) to select a
Memory (Memo1, 2, 3) to change/store a
picture quality parameter.
4 Use the cursor buttons (5/∞) to select a
picture quality parameter, then use the
cursor buttons (2/3) to adjust that
parameter.
Setup Memo1 Memo2
Video Progressive Motion
DNR
CNR
MNR
BNR
Sharpness High
Sharpness Mid
Detail
Brightness
Contrast
ENTER
• Progressive Motion – When using progressive
scan, this adjusts the motion and still picture
quality. There are three modes: Auto, Video, and
Film. In Auto mode, the player automatically
distinguishes film-source material and video-
source material. Set to the Video mode when
you know the program you are watching is from
video-source material (such as animations).
Set to the Film mode when you know the
program, you are watching is from film source
material.
Auto 1: Standard setting
Auto 2: Setting for moving images
Auto 3: Setting for still images
Video 1: Standard setting
Video 2: Setting for moving images
Video 3: Setting for still images
VIDEO ADJUSTMENT
Memo3
Auto1
Min Max
Min Max
Min Max
Min Max
Soft Sharp
Soft Sharp
Soft Sharp
Min Max
Min Max
RETURN SETUP